Nathan Non-raised letter K #3L Bell Question.

User avatar
Rrxingrick
Posts: 62
Joined: Sun Jul 12, 2015 5:42 am
Contact:

Nathan Non-raised letter K #3L Bell Question.

Postby Rrxingrick » Wed May 02, 2018 8:38 pm

Hi everyone,

I am reaching out to see if there is anyone out there that can provide the FACTORY internal measurements (specifically the bore depth) of the older Nathan K #3L (440 Hz) bell. I know that the intended frequency is 440 Hz but I am not looking to match that, I want to match the factory specs and I know that will yield different results from bell to bell and that is perfectly fine. Just to avoid any confusion, I do not need the measurements of the newer Nathan Raised Letter K #3B as I already have one of those and they play more flat than the 3L. Also if anyone can provide photos of the internals along with a photo of the stamping on the outside I would appreciate it so much. Thank you!!!

User avatar
Rrxingrick
Posts: 62
Joined: Sun Jul 12, 2015 5:42 am
Contact:

Re: Nathan Non-raised letter K #3L Bell Question.

Postby Rrxingrick » Thu May 17, 2018 1:16 pm

Bump


Return to “Locomotive Air Horns”

Who is online

Users browsing this forum: No registered users and 1 guest