My CAD Drawing Work [Rare Horn Parts]

User avatar
Bradygoldminer
Posts: 62
Joined: Fri Aug 19, 2016 12:56 pm

My CAD Drawing Work [Rare Horn Parts]

Postby Bradygoldminer » Fri May 11, 2018 5:14 pm

Here are 2 of my CAD drawings I drew so far. If you want me to draw something out for you please message me. These drawings are for CNC machining, so if you wanted to get something CNC machined these drawings are compatible for it. Here is a video example of what i'm talking about.



Also, here are some pictures of my drawings.

Early K Manifold.PNG
Early K Manifold.PNG (49.85 KiB) Viewed 183 times

Early K Manifold 2.PNG
Early K Manifold 2.PNG (42.41 KiB) Viewed 183 times

Early K Manifold 3.PNG
Early K Manifold 3.PNG (46.58 KiB) Viewed 183 times
Last edited by Bradygoldminer on Fri May 11, 2018 5:28 pm, edited 1 time in total.

User avatar
Bradygoldminer
Posts: 62
Joined: Fri Aug 19, 2016 12:56 pm

Re: My CAD Drawing Work [Rare Horn Parts]

Postby Bradygoldminer » Fri May 11, 2018 5:15 pm

Ribbed Back Cap

Ribbed Cap 1.PNG
Ribbed Cap 1.PNG (65.88 KiB) Viewed 181 times

Ribbed Cap 2.PNG
Ribbed Cap 2.PNG (91.81 KiB) Viewed 181 times

Ribbed Cap 3.PNG
Ribbed Cap 3.PNG (52.35 KiB) Viewed 181 times

User avatar
Mafarnz
Posts: 759
Joined: Sat Oct 04, 2014 1:35 pm
Location: Moscow Idaho
Contact:

Re: My CAD Drawing Work [Rare Horn Parts]

Postby Mafarnz » Fri May 11, 2018 8:08 pm

Some Leslie tab back caps that could be done in either bronze or aluminum would be nice.
Matt F
Pullman WA
Long live the BN and the RS3K!

User avatar
Bradygoldminer
Posts: 62
Joined: Fri Aug 19, 2016 12:56 pm

Re: My CAD Drawing Work [Rare Horn Parts]

Postby Bradygoldminer » Sat May 12, 2018 9:48 am

Mafarnz wrote:Some Leslie tab back caps that could be done in either bronze or aluminum would be nice.

Unfortunately, I don't have that part in my personal stock, however, I can probably borrow one from my buddy in the next few weeks.
Last edited by Bradygoldminer on Sat May 12, 2018 10:10 am, edited 1 time in total.

User avatar
njt4272
Posts: 41
Joined: Sun Jan 01, 2017 12:14 pm
Location: The Pocono Mountains of PA

Re: My CAD Drawing Work [Rare Horn Parts]

Postby njt4272 » Sat May 12, 2018 10:01 am

Heck with drawing up parts for K horns that are still in production and readily available! Draw up some rare stuff! M horn parts! Wabco parts! A Hancock 'Dick in a dish'! Hell, draw up a complete H5 so someone can make a few new ones! There are only 9, ya know! LOL!!
- Mixed Cast Nathan P5r24 - NC1,2,4,5,OC3 - The 'Fantasy Quality' P5 from the 'P-Unit Primer'
- Ex-NJT Wabco AA-2
- 1952 Nathan M5 ABF
- Mixed Cast Nathan P3X: P235 ABF - NC2,3,OC5 - F,G#,C#
- OC Nathan P01235- From the Elwood Belknap collection

User avatar
Mafarnz
Posts: 759
Joined: Sat Oct 04, 2014 1:35 pm
Location: Moscow Idaho
Contact:

Re: My CAD Drawing Work [Rare Horn Parts]

Postby Mafarnz » Sat May 12, 2018 6:35 pm

Bradygoldminer wrote:qu
Unfortunately, I don't have that part in my personal stock, however, I can probably borrow one from my buddy in the next few weeks.


Don’t forget that the spreader plate is a separate part. Try and find one that has the plate removable.
Matt F
Pullman WA
Long live the BN and the RS3K!

User avatar
Leslie S5A
Posts: 57
Joined: Fri Mar 09, 2018 5:26 pm

Re: My CAD Drawing Work [Rare Horn Parts]

Postby Leslie S5A » Mon May 14, 2018 2:36 am

Those 3D Images look so realistic.


Return to “Locomotive Air Horns”

Who is online

Users browsing this forum: FS150HZ and 1 guest